RFX-3 Receiver
433 MHz wireless receiver
An IP65 rated 3-channel receiver, 150 metres line of sight, 3x Volt free contacts as well as lighting control outputs.
The RFX-3 receiver monitors the active state of up to three Opal RFX passive infrared detectors. The RFX-3 can be mounted externally or internally with a line of sight reception distance of up to 150 metres to the detector(s).
Part Codes
GJD017 RFX-3 Receiver
Gallery
Technical SpecificationsSupply: |
12VDC @ 35mA nominal (9 to 20 VDC maximum) |
Outputs: |
CCTV Outputs 3 x independent channel outputs (24hr) Selectable N/O (form A) or N/C (form B) Individual timers 0.4 to 60 seconds after last detection. Non volatile memory.
'A' Outputs
RF Loss Outputs
'S' Outputs |
Tamper: |
Back & front tamper volt free output (form B) |
Indication: |
Independent channel active & low battery outputs / LED’s |
Operating Temp: |
-20°C to + 55°C. Conformally coated electronics for increased stability |
Housing: |
High Impact ABS Housing |
Protection Rating: |
IP 65 |
Related DownloadsOpal RFX & RFX-3 Receiver Technical Manual:
Opal RFX & RFX-3 Receiver Promotional Literature:
Related Products Related Articles
Unit 2 Birch Industrial Estate, Whittle Lane, Heywood, Lancashire, OL10 2SX, United Kingdom
Sales: +44 (0) 1706 363998 Tech: +44 (0) 1706 363990 Fax: +44 (0) 1706 363991
Contact us via e-mail
Registered in England Number 02185080